Facing Epson Printer Error 0xe5? Follow The Steps To Fix It

 This error occurs because of the failure of the printer driver software. Although, there are several reasons due to which the error code 0xe5 occurs on your system. Like virus or malware attack, improper printer installation, and hardware failure. If you are also facing the same problem, either connect with the Epson printer error code 0xe5 or take a try to solve the issue on your own. Below given steps will help you in resolving the problem quickly.

Reasons For Epson Error Code 0xe5

The following are the factors that are usually responsible for causing this error. By this, you are not able to proceed with your work with the device.

• If malware affects your system, then it can slow down your computer and display this error.
• The other important reasons for the error are a CR encoder failure or motor driver failure.
• Improper connection of the computer with the printer often causes this issue.
• In the case of a wireless printer, the computer may fail to recognize the printer and display this error.
• There can be a problem with the blue stripe of the tape-holding ink cartridge carrier.
• Moreover, the printhead of your printer may be in bad condition. If not, then a paper jam can cause this issue.
• This error can develop due to an overloaded carriage of the printer.
• Empty or faulty cartridges are other possible reasons behind this error.

Below are the steps by which you can solve the error easily, you need to do is follow and execute them on your computer.

Detecting Hardware Default

• First of all, examine whether there is any fault on the encoder strip. If found, clean it with a dry cotton cloth thoroughly.
• You have to check for the paper strips if any that were jammed in your Epson printer as it is also a reason for the occurrence of the Epson Printer Error 0XE5. If detected, remove all the paper scraps which are stuck inside the printer.
• Now, check that the belt of the printer is well seated or not.
• Then, see the mainboard for any damages.
• Be sure that the Epson printer driver is properly installed.

If the above method does not work for you to resolve the problem, then you must proceed and execute the second method. Below is the step to fix the problem by implementing the smart pc fixer method.

Implementing the ‘SmartPCFixer’ method

• Firstly, you need to download and Install the SmartPCFixer utility software from the web browser to your computer or laptop.
• Launch the software and look for the scanning option to do a thorough scan of the entire Epson Printer.
• Now, tap on the ‘Fix All’ option to start the scanning process and wait for some time until scanning is finished.
• Now, perform a test print to check whether the Epson Error 0XE5 appears or not.

In case, you are still facing the same problem with your printer even after following the steps mentioned in the above section. We recommend you to connect with our Epson printer support team to avail of the service by dialing our toll-free number +(1)-855–626–0142. By this, you can get an effective solution to your printer problems at a reasonable rate.